Commercial lighting, specified properly
LightKilo aggregates products, full spec tables, and manufacturers across the commercial and architectural lighting industry. One place to shortlist panels, high bays, downlights, linear, and outdoor fixtures.
Edge-lit and back-lit LED panels for suspended ceilings and surface mounting. The standard choice for offices, schools, healthcare, and retail back-of-house where uniform, glare-controlled illumination matters.
Offices · Education · Healthcare
Recessed LED troffers for T-grid ceilings — volumetric, center-basket, and lensed designs that replaced the fluorescent 2×4. Specified for offices, schools, and healthcare where codes, plenum ratings, and emergency options drive the choice.
Offices · Education · Healthcare
Recessed LED downlights from compact fixed units to adjustable and wall-wash variants. Specified across hospitality, retail, and commercial interiors where a clean ceiling plane is required.
Hotels · Retail · Corridors
Suspended, surface, and recessed linear LED profiles — continuous-run capable, with direct, indirect, or direct/indirect distributions. The workhorse of modern office and architectural lighting schemes.
Open-plan offices · Architectural feature runs · Retail aisles
Track and busway systems with adjustable heads and monopoints — line-voltage, low-voltage, and magnetic systems. The flexible layer of retail, gallery, and hospitality lighting where aim and relamp cycles change with every merchandising reset.
Retail · Galleries & museums · Hospitality
Suspended decorative and architectural pendants — single statement pieces, multiples over counters and tables, and large-scale rings and drums for lobbies and atria. Where the fixture itself is part of the interior design.
Lobbies & reception · Restaurants & bars · Retail
Interior wall-mounted luminaires from ADA-depth corridor sconces to decorative statement pieces. A layered-lighting staple in hospitality, multifamily, and healthcare corridors.
Corridors · Hotels · Multifamily
Linear cove, perimeter, and grazing systems that light architecture rather than task planes — asymmetric throws, seamless runs, and tunable-white options for ceilings, walls, and slots.
Ceiling coves · Perimeter slots · Feature walls
Flexible LED tape, rigid strip, and neon-flex systems with channels and extrusions — specified by lumens per foot rather than per fixture. The detail layer: millwork, handrails, shelving, signage, and accent lines.
Millwork & shelving · Handrails · Signage & accents
High-output UFO and linear high bay fixtures for mounting heights above 6 m. Built for warehouses, manufacturing floors, logistics hubs, and sports halls that need high lumen packages and tight optical control.
Warehouses · Manufacturing · Logistics
IP-rated LED floodlights for façades, yards, car parks, and perimeter security. High-efficacy optics, surge protection, and photocell/motion control options for always-outdoors duty.
Façades · Car parks · Yards & perimeters
Pole-mounted area luminaires and decorative post tops for parking lots, campuses, streets, and plazas — IES Type II–V distributions, house-side shields, and dark-sky-friendly optics.
Parking lots · Campuses & plazas · Streetscapes
Building-mounted exterior wall packs — full-cutoff, adjustable, and emergency-backup variants for entries, loading docks, and perimeter walls where code-driven light levels meet vandal-resistant construction.
Building perimeters · Loading docks · Entries & exits
Illuminated bollards and light columns for pathways, campuses, and site perimeters — louvered, shielded, and decorative styles, with impact-rated and marine-grade options.
Pathways · Campuses · Waterfronts
Landscape and garden luminaires — in-grade uplights, ground-spike accents, step lights, and underwater fixtures that shape trees, façades, and hardscape after dark.
Gardens & planting · Tree uplighting · Steps & hardscape
Code-required life-safety lighting: exit signs, emergency heads, combo units, inverters, and battery packs. Specified to building codes (NFPA 101, local AHJs) with self-test and central-battery options.
All commercial buildings · Egress paths · Stairwells
Spec a fixture to your exact requirements and export a submittal-ready sheet.
Open configurator →
Lumenwerx · Downlight
True-to-size architectural downlight & cylinder family in 2"–6" apertures (round/square), with COB XPoint optics, seven beam angles from 10° to 90°, 80/90/95+ CRI, delivered output from 1132 to 10551 lm, and low UGR<10 shielding across recessed, pendant, surface, and wall mountings.
Configure published options →Axis Lighting · Linear
4-inch-aperture architectural linear family — direct, indirect, and direct/indirect distributions up to 1200 lm/ft (up and down), 90 CRI, tunable-white and BIOS circadian options, in 2–12 ft sections and continuous system runs.
Configure published options →Lithonia Lighting · High Bay
Contractor Select linear LED high bay with 12,000–30,000 lm packages, up to 144 lm/W, glare-control lens, and DLC Premium listing — a stocked one-for-one HID/fluorescent replacement.
Configure published options →Lithonia Lighting · Panel Light
Backlit LED flat-panel family in 1×4, 2×2, and 2×4 sizes with switchable-lumen and switchable-CCT options — including high-lumen packages up to 10,000 lm — for schools, offices, retail, and healthcare spaces.
Configure published options →Lumenwerx · Linear
Curvilinear architectural linear family in 2", 3", and 4" apertures — rings, patterns, and freeform shapes from 350 to 1200 lm/ft, direct and direct/indirect, 80/90+ CRI, in pendant, recessed, and surface mountings with sealed (IP54/64/65), acoustic, and perimeter variants.
Configure published options →Finelite · Linear
High Performance 4" aperture linear pendant — direct, indirect, or indirect/direct, any length from 2 ft in 1/16" increments, up to ~2,200 lm/ft combined, with a 10-year warranty.
Configure published options →Specification guides written for the space you're lighting — targets, fixture types, and shortlist starting points.
Specifying LED lighting for K–12 classrooms — visual comfort, color quality, board and display zones, vacancy sensing, daylight response, and a practical procurement checklist.
A commercial corridor lighting specification workflow for visual continuity, glare, controls, accessibility, emergency operation, and field commissioning.
A foodservice lighting specification workflow for prep, cooking, warewashing, cold storage, cleaning, controls, and commissioning.
A commercial-lobby lighting specification workflow for arrival, reception, accessible circulation, daylight response, emergency egress, and commissioning.
A commercial restroom lighting specification workflow for entry, vanity, stall, cleaning, controls, accessibility, egress coordination, and closeout.
A commercial stairwell-lighting specification workflow for safe circulation, emergency operation, signage, sensor coverage, maintainable equipment, and commissioning.
A code-aware stairwell-lighting specification workflow for tread visibility, emergency egress, occupancy controls, glare, maintenance, and commissioning in commercial buildings.
A data-center lighting specification workflow for rack aisles, air-management coordination, controls, emergency egress, maintenance, and commissioning.
A commercial electrical-room lighting specification workflow for clear working spaces, safe manual control, service access, emergency coordination, and commissioning.
A code-aware workflow for documenting egress illumination, exit signs, emergency power, controls, testing, and closeout without treating a catalog fixture as a complete life-safety design.
A practical lighting-specification workflow for food manufacturing and packaging — task visibility, contamination protection, washdown coordination, controls, and closeout.
A practical lighting-specification workflow for school and recreation gymnasiums — court visibility, glare review, multi-use scenes, equipment protection, controls, and closeout.
A room-by-room LED lighting specification workflow for healthcare facilities — clinical task light, patient comfort, glare control, controls, cleaning coordination, and closeout documentation.
Specifying lighting for hotels — guest rooms, corridors, lobbies, and restaurants. Warm-dim downlights, CRI requirements, layered scenes, and recommended products.
A laboratory-lighting specification workflow for bench tasks, fume hoods, controls, emergency egress, cleanability, and commissioning.
A practical commercial loading dock lighting guide for safer truck approaches, dock edges, trailer thresholds, and indoor staging areas — with fixture, control, glare, and commissioning checks.
Specifying LED lighting for open-plan and cellular offices — UGR limits, illuminance targets, panels vs linear, daylight integration, and recommended products.
A commercial parking-garage lighting specification workflow for driving transitions, pedestrian visibility, accessible routes, controls, emergency operation, and commissioning.
How to specify LED parking lot and area lighting — foot-candle targets, IES distribution types, pole heights and spacing, BUG/dark-sky limits, and controls that satisfy energy codes.
A practical LED specification guide for retail sales floors — ambient and accent layers, merchandise color, vertical light, aiming, controls, and a submittal checklist.
How to specify LED high bay lighting for warehouses and distribution centers — mounting heights, lux targets, aisle optics, sensors, and recommended fixtures.
