Order code builder

Via 4 Pendant — static white order code builder

Assemble a valid Lumenwerx Via 4 Pendant — static white catalog number from its real ordering tree. Choose each option — including made-to-order values like lengths, radii, and driver systems — and the builder composes the full order code, for example VIA4P-DI-HLO-FH-WIO2-SW-80CRI-350LMF-350LMF-27K-8FT0IN-120V-D1-1C-ACS-W, keeping only the combinations Lumenwerx actually builds. Copy the code, share the exact build by link, or print a configuration sheet, then confirm against the datasheet before ordering.

Via 4 Lumenwerx Full specs →

Ordering tree

Every field of the Via 4 Pendant — static white catalog number and its published option codes. The builder above enforces the manufacturer's real availability rules — some options are offered only with specific upstream selections, and made-to-order values (lengths, radii, quantities) are entered within the published bounds. Confirm the exact codes against the current datasheet revision before specifying.

Distribution

Direct/Indirect needs both a direct and an indirect optic; Direct-only or Indirect-only sets the unused side to NA.

DI: Direct / Indirect
D: Direct
I: Indirect

Direct optic

HLO: High-efficiency Lambertian optic
ARO2: Asymmetric refractive optic
WRO2: Wall-wash refractive optic
WDO: Widespread direct optic
LGO: Low-glare optic
MPO: Micro-prismatic optic
NA: Not applicable (indirect fixture)

Lens position

HLO accepts flush, regressed, or drop lenses; refractive/widespread/low-glare/micro-prismatic optics are flush only.

FH: Flush
RG: Regressed
0.5D: 0.5" drop
1.5D: 1.5" drop
NA: Not applicable (indirect fixture)

Indirect optic

WIO2: Widespread indirect optic
TIO: Translucent indirect optic
WAI2: Widespread asymmetric indirect optic
HLO: High-efficiency Lambertian optic
ARO2: Asymmetric refractive optic
NA: Not applicable (direct fixture)

Direct/Indirect only.

Not available with Direct/Indirect.

Light source

BIOS Static/Dynamic/Tunable (BIOSST/BIOSDY/BIOSTU) are low/medium-lumen, consult-factory — see datasheet page 8.

SW: Static white

CRI

80CRI: 80+ CRI
90CRI: 90+ CRI

Direct lumen package

For Direct/Indirect, the indirect side must not exceed 750 lm/ft (500 lm/ft when direct is 1500). Confirm caps against the datasheet.

350LMF: Hypo — 350 lm/ft
500LMF: Low — 500 lm/ft
750LMF: Medium — 750 lm/ft
1000LMF: High — 1000 lm/ft
1200LMF: Ultra-high — 1200 lm/ft
1500LMF: Hyper — 1500 lm/ft
NA: Not applicable (indirect fixture)

Minimum 3 ft fixture.

HLO only; use in suitable applications.

Indirect lumen package

350LMF: Hypo — 350 lm/ft
500LMF: Low — 500 lm/ft
750LMF: Medium — 750 lm/ft
1000LMF: High — 1000 lm/ft
1200LMF: Ultra-high — 1200 lm/ft
1500LMF: Hyper — 1500 lm/ft
NA: Not applicable (direct fixture)

Minimum 3 ft fixture.

HLO only.

Colour temperature

27K: 2700 K
30K: 3000 K
35K: 3500 K
40K: 4000 K
50K: 5000 K

Luminaire length

Nominal length in feet and inches. Single units 2–12 ft (up to 8 ft for MPO); continuous runs over 12 ft. Minimum 3 ft for Direct/Indirect.

⟨feet⟩FT⟨inches⟩IN: Length feet ≥ 2 ft, inches 0–11 in

Voltage

120V: 120 V
277V: 277 V
UNV: 120–277 V
347V: 347 V

Available with the D1 driver only.

Driver

PoE (Power-over-Ethernet) compatible — consult factory.

D1: 1% 0–10 V
DA: DALI
LDE1: Lutron Hi-lume 1% Eco
ELD1: eldoLED 1% ECOdrive 0–10 V
ELD0: eldoLED 0.1% SOLOdrive 0–10 V
ELV: ELV 120 V
TRI: TRIAC 120 V

On-site commissioning required.

Circuiting

1C: 1 circuit
2C: 2 circuits
⟨circuits⟩MC: Multi-circuit circuits ≥ 1

Direct/Indirect only — separate direct and indirect circuits.

Specify total circuits; provide layout. Minimum 4 ft section per circuit.

Fixture power type

Optional

Whole-fixture emergency / night-light / daylight / generator options. Per-section variants are consult-factory.

EC: Emergency-powered fixture
NL: Night-light fixture
DL: Daylight fixture
GTD: Generator transfer device fixture

Minimum 4 ft; not available with 347 V.

Mounting

Standard canopies are black for black fixtures, white otherwise.

ACS: Aircraft cable, standard
STS: Stem, standard
ACC(⟨drop length⟩): Aircraft cable, custom
STC(⟨stem length⟩): Stem, custom

Finish

W: Matte white
AL: Aluminum
B: Matte black
CF⟨ral number⟩: Custom finish (RAL)

Options

Optional

Fuses and caddy clips (aircraft cable only). Separate multiple codes with a "+" on the order.

FU120: Fuse 120 V
FU277: Fuse 277 V
CTB9: T-bar caddy clip, 9/16"
CTB15: T-bar caddy clip, 15/16"
CTG9: Tegular caddy clip, 9/16"
CTG15: Tegular caddy clip, 15/16"
CST: Screw-slot caddy clip

Catalog number	VIA4P-DI-HLO-FH-WIO2-SW-80CRI-350LMF-350LMF-27K-8FT0IN-120V-D1-1C-ACS-W
Quantity	1
Distribution	Direct / Indirect
Direct optic	High-efficiency Lambertian optic
Lens position	Flush
Indirect optic	Widespread indirect optic
Light source	Static white
CRI	80+ CRI
Direct lumen package	Hypo — 350 lm/ft
Indirect lumen package	Hypo — 350 lm/ft
Colour temperature	2700 K
Luminaire length	Length — feet 8 ft, inches 0 in
Voltage	120 V
Driver	1% 0–10 V
Circuiting	1 circuit
Mounting	Aircraft cable, standard
Finish	Matte white